Steel piles, cement piles, and pipelines in seawater are corroded by seawater. If measures are not taken immediately, it will lead to structural paralysis and cause losses. CNPetrol
The PetroGuard brand mineral grease anti-corrosion tape from ACS Canada can efficiently prevent corrosion or stop further corrosion. For corrosion in seawater, anti-corrosion tape can be directly applied in water, which is incomparable to any other anti-corrosion material. In addition, the mineral grease belt can be reused, which is very convenient for daily maintenance and greatly saves the cost of daily maintenance. From the perspective of short-term and long-term economic benefits, social benefits, and equipment anti-corrosion and longevity, this system is the most suitable.
For specific working conditions, a layer of marine armor can be tied outside the mineral grease belt system to prevent the invasion of sea moths or other marine organisms, and to improve the mechanical protection performance required when encountering tidal effects and other environmental factors, thereby making the anti-corrosion system more sturdy.
Construction steps:
Pre treatment: Use sandpaper or iron brush to remove loose rust skin
Step 1: Apply ocean primer (model MP)
Step 2: Wrap the ocean mineral oil tape (model UW)
Introduction to PetroGuard System Products
Component 1: PetroGuard ® MP marine type mineral grease primer
Soft brown, containing rust inhibitor that displaces moisture, and adding a wide range of spectrum antimicrobial agents, effectively preventing the growth of marine organisms. It will not dry, harden or crack.
There are three functions in the entire system: first, it is used in front of the Ocean Mineral Oil Belt (UW) to infiltrate existing rust and replace water; Secondly, increase the viscosity with the mineral fat band; Thirdly, provide anti-corrosion effect
Can provide packaging of 4kg/barrel, 4 barrels/box, or 20kg individually packaged in drums
Component 2: PetroGuard ® UW marine type mineral oil belt
A non-woven synthetic fiber woven fabric fully impregnated with saturated mineral fat and inert silicon filler as the matrix, with a wide range of spectral antimicrobial agents added, effectively preventing the growth of marine organisms.
Used for replacing moisture, sealing marine piles and underwater pipelines, isolating the external environment and marine organisms.
Can provide roll widths of 100mm, 150mm, 200mm, and 300mm, with a uniform roll length of 10m